Simple Ways of Diy Shaker Cabinet Doors


DIY shaker cabinet doors are one of the easiest ways to upgrade your kitchen. You know that a complete kitchen remodel requires a serious investment. Since it not only has cabinets but backsplash, countertops, flooring, lighting, etc. Sometimes, especially if your flooring and countertops are up to date, everything is needed. Change the cabinet doors and you have a completely remodeled kitchen. DIY Shaker cabinet doors are relatively easy to do. What you need is oak strips, plywood, wood glue and a table saw. And if you realize that this is a cheap kitchen renovation project, you can give it some consideration. Flat kitchen cabinet doors can be easily transformed into eye-catching shaker style cabinets in a weekend.

READ ALSO :   The Average Height of Garage Ceiling Ideas

Although the Traditional Shaker cabinets have a 3/4 inch strip, a 1/4 inch strip gives you the same look and look. So it really is up to you to decide the right width. Choose the right color for your upgraded cabinets. And you’ll be amazed by the kitchen’s all-new and stylish look. Shaker closet doors are strong and attractive and can be made with tools you probably have in the garage. Diy shaker cabinet door fronts are a project that requires some initial planning. You need some space to work, preferably in the garage or in the yard. To make the horizontal lines, you need to measure the distance between the hardwood strips up and down. And cut the hardwood strips for the top and bottom.¬†Apply adhesive to the back and place the horizontal stripes.

READ ALSO :   House Plans For A 3000 Sq Ft Home

Shoot a nail through the strips and place clamps on them until the glue is dry. Sand the corners and place a primer, paint, varnish or stain in the color you have chosen to suit. You will need to remove the cabinet doors and hinges from all doors. Sand the front of the door to remove old paint, dirt or paint. Be careful to grind parallel to the grain, until the door is smooth. Carefully measure the sides of the door that are parallel to the grain. And cut two pieces of 2 1/4 inch with a miter saw. Apply adhesive to the back of the strips and place on each side of the unfinished cabinet doors. Shoot a pin nail centered 1 inch from the top and 1 inch from the bottom. Hold both strips with clamps until the glue is completely dry. The interior of the kitchen.

READ ALSO :   Pictures Of Small Houses 800 Sq Ft

Comments are closed.